The 6550 is a high power beam tetrode vacuum tube used mainly as an audio power amplifier.
The 6550 was developed by Tung-Sol in 1955[2][3] originally for use as a servo amplifier. It was used in audio equipment before semiconductor power amplifiers came into use, and continues in production today. It is often found in valve-driven bass amplifiers such as Marshall and Ampeg guitar amplifiers and the Leslie speaker system.
Based on the 6L6 vacuum tube, the 6550 was designed to have higher output power and better stability. It operates with a plate voltage of 600VDC, a screen voltage of 400VDC, and plate dissipation of 35 watts.[6] The KT88, KT90, and 6550, although not identical, are often interchangeable, dependent on external circuit parameters. The 6550's glass envelope was originally wider in the middle than at the top and bottom, but a straight-sided design was later introduced by GE and Philips.
The new 6550 from JJ is just superb. We listened to them in our in-house hi-fi and were pleased to find they had solid low-end without any muddiness. If you need to re-tube your SVT, these are the perfect choice.
R. F. TRIODE
Base: OCTAL
Uf = 6,3 V
If = ca 1,6 A
Typical characteristic:
Ua = 250 V
Ug2 = 250 V
-Ug1 = 14 V
Ia = 140 mA
Ig2 = max 12 mA
S = 11,8 mA/V
Ri = 16 Ω
more information
Data sheets 6550 NEW:
